Early May Enterprises Pty Ltd
Original Machine Embroidery Designs

Exclusive Floriani Importer & Distributor
Australia & New Zealand

Phone 61-7-3353-4709
Fax 61-7-3353-6110

FAW183 - Appli-Kay Wonder - 18" x 3yds

Be the first to review this product

Availability: In stock

Excl. Tax: $74.55 Incl. Tax: $82.01
  • Buy 2 for $60.00 ($66.00 incl. tax) each and save 20%

FAW183 - Appli-Kay Wonder - 18" x 3yds Quick Overview

Floriani Appli-Kay Wonder 18" x 3yds

Floriani Appli-Kay Wonder 18" x 3yd

More Views

  • FAW183 - Appli-Kay Wonder - 18

FAW183 - Appli-Kay Wonder - 18" x 3yds Description

Floriani Appli-Kay Wonder®

Turn your embroideries into appliqués or patches with this unique, pressure sensitive, fusible web. It may also be used to create traditional appliqués for quilt squares, children's garments, tote bags, etc. Once heat is applied, Appli-kay Wonder® creates a permanent bond with the fabric or garment it is fused to.

•Pressure sensitive side makes re-positioning multiple pieces a snap and keeps them from moving when pressing into place!

•Machine washable and dry cleanable

•Won't gum up machine needles
To turn an embroidery design into a patch or appliqué:

1.Once the design is complete and trimmed, trace the outline of the design on to the paper protective sheet. *Remember that you need to trace or draw the "reverse" of the image.

2.Following the lines you've drawn, cut the shape from the Appli-kay Wonder®.

3.Place the soft/shiny side (exposed fusible) of the Appli-kay Wonder® to the backside of the embroidery and then press using a medium to high temperature on your iron and no steam. Hold the iron in place for at least 3 seconds. *All irons vary in temperature. Start at a medium setting and work your way up until you get a good fuse.

4.Once it has cooled, peel away the contact paper from the embroidery design which exposes the sticky side.

5.Position the embroidery on the garment and then press into place. Press from the applique side (use a press cloth to protect your embroidery thread) and underneath the fabric/garment for a secure bond. Finish by stitching around the embroidery with a satin or straight stitch.
Traditional Appliqué using Floriani Appli-kay Wonder®:

1.Trace the design to be appliquéd onto the protective paper sheet of the Appli-kay Wonder®. Tip! Use a light box or trace at a window for accuracy!

2.Trim around the image leaving at least ¼" inch of the Appli-kay Wonder outside the traced lines.

3.Fuse the Appli-kay Wonder® piece to the wrong side of the decorative fabric using a medium to high temperature setting on your iron (No Steam). All irons vary in temperature settings. Start at a medium temperature and slowly increase until you get a good fuse. The fusible side of Appli-kay Wonder® is the soft/shiny side. Hold the iron in place for at least 3 seconds and then flip the piece over and press again on the fabric side.

4.Once cooled, cut out the appliqué design using the trace lines.

5.Peel back the protective sheet to expose the sticky surface. **It is very important to let the applique cool before removing the paper.

6.Position the appliqué piece on the garment and press in to place. *Press on the appliqué side and the fabric side for maximum bonding. Finish by stitching around the appliqué with a satin or decorative stitch.
**Remember that your traced image will be reversed once it is traced onto the paper side of Appli-kay Wonder®. Make adjustments to the original image to prevent this.

**Most fabrics are treated with a starch or sizing. Pre-washing your materials prior to using them for applique will remove this treatment from the factory and will allow Appli-kay Wonder to bond more securely.

**Test all materials and procedures thoroughly before applying to your finished garment.

FAW183 - Appli-Kay Wonder - 18" x 3yds Additional Information

Video No