Early May Enterprises Pty Ltd
Original Machine Embroidery Designs

Exclusive Floriani Importer & Distributor
Australia & New Zealand

Phone 61-7-3353-4709
Fax 61-7-3353-6110
floriani@emee.com.au

No Show Nylon Mesh

No Show Nylon Mesh

"No Show" Nylon Mesh is designed for a single layer application, and features the most stable no show mesh on the market.

Floriani No Show Nylon Mesh Stabilizer

Floriani No Show Nylon Mesh is a 1.5 oz sheer cutaway available in white and beige. Unlike traditional cutaway, this product will not shadow through on light coloured fabrics such as knits. Its softness makes it ideal for children's clothing and baby garments.

The unique embossing pattern of this product makes it a staple in your embroidery stabilizers. Hoop the stabilizer to the back of the garment or fabric for soft flexible support for light fabrics and designs. This product is also available in a fusible version which eliminates the need for messy spray adhesives.

Floriani No Show Nylon Mesh Stabilizer

•Will support around six to eight thousand stitches on an average size, well-digitized embroidery design (4" x 4").

•Will not shadow through on light weight cottons and knits when worn against the skin.

•Perfect foundation for crazy patch quilting.

•Ideal foundation for patches, emblems and free standing embroideries.

To use Floriani No show Nylon Mesh:

1.Cut a piece of the stabilizer at least one inch larger than the hoop size you are planning to use.

2.Hoop the stabilizer to the back of the garment.

3.Place the embroidery frame on to the machine. Complete the layout and centering of the design.

4.Important! If the design is denser than 6,000 stitches or if it is a poorly digitized design (too many stitches for designs size),"float" one layer of Floriani Medium Tearaway between the hoop and the bed of the machine for each additional 8,000 stitches for added support! After the design is complete the tear away can be removed leaving just the soft mesh against the skin.

5.After the design is complete, remove the garment from the machine and embroidery hoop. Trim the stabilizer as close to the design as possible.

*Tip! If embroidering knit, don't forget to use topping!

*Tip! To get extra support on large or problem designs without adding bulk, try crossing two layers of the mesh when hooping, one at 90°and the other at 45°. This will offer a tremendous amount of stabilization without stiffness.

Did you know that your Floriani No Show Nylon Mesh is a great way to create free standing embroidery designs that you can adhere or appliqué to any surface? Think of the possibilities! Now you can have your beautiful embroideries on the most delicate fabrics or the oddest or most difficult foundations! Click on the link below to check out the projects page for this exciting technique.

Floriani's No Show Mesh Sizes Available:

12” x 10 yds, 20” x 10 yds


Floriani No Show Nylon Mesh Fusible

Floriani No Show Nylon Mesh Fusible is a 1.5 oz sheer cutaway available in black, white and beige. Unlike traditional cutaway, this product will not shadow through on light colored fabrics such as knits. Its softness makes it ideal for children's clothing and baby garments.

The uniqueness of the fusible version makes this product a staple in your embroidery stabilizers. There is no need for basting or messy spray adhesives which leave a residue on the needle and machine when using this product. By fusing the stabilizer to the back of the garment, we are more successful in hooping and do not stretch the garment out of shape.

The stabilizer is temporarily attached to the entire area where the embroidery will be stitched unlike spray adhesives which only "spot" tack and allow shifting of the fabric.

This product is also available in a non-fusible version.

•Will support around six to eight thousand stitches on an average size, well-digitized embroidery design (4" x 4").

•Use the fusible version to cover up scratchy stitches on the back of the embroidery.

•Will not shadow through on light weight cottons and knits.

Floriani No Show Nylon Mesh Fusible Stabilizer

To use Floriani No show Nylon Mesh Fusible:

1.Cut a piece of the stabilizer at least one inch larger than the hoop size you are planning to use.

2.Fuse the entire piece of the stabilizer on to the back of the garment using a low to medium temp, dry iron. (260°F, silk setting) When pressing the stabilizer on to the garment, the iron surface should touch the fabric, not the stabilizer.

3.Hoop the garment and place the embroidery frame on to the machine. Complete the layout and centering of the design.

4.Important! If the design is denser than 6,000 stitches or if it is a poorly digitized design (too many stitches for designs size),"float" one layer of Floriani Medium Tearaway between the hoop and the bed of the machine for each additional 8,000 stitches for added support! After the design is complete the tear away can be removed leaving just the soft mesh against the skin.

5.After the design is complete, remove the garment from the machine and embroidery hoop. To remove the No Show Mesh Fusible, re-heat the stabilizer and peel it back gently to the design and trim.

6.*Tip! If embroidering knit, don't forget to use topping!

7.*Tip! To get extra support on large or problem designs without adding bulk, try crossing two layers of the fusible mesh, one at 90°and the other at 45°. This will offer a tremendous amount of stabilization without stiffness.

Floriani's No Show Nylon Mesh Fusible Available Sizes:

12” x 10 yds, 15” x 10 yds (beige only), 20” x 10 yds

Items 1 to 9 of 15 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction

Items 1 to 9 of 15 total

per page
Page:
  1. 1
  2. 2

Set Descending Direction